| F25DMH |
| Tiller Handle |
| Dry weight: |
77-86 kg |
| Performance |
| Max. prod shaft output: |
18.4 kW (25 ps) @5500 r/min |
| Full throttle operating range: |
5000-6000 r/min |
| Idling speed: |
975 ± 50 r/min |
| Fuel consumption: |
(9.2.0 l/h @ 5500 r/min *reference data) |
| Engine |
| Engine type: |
SOHC, In-line 2 |
| Displacement: |
498 cm3 |
| Bore x stroke: |
65.0 mm x 75.0 mm |
| Compression ratio: |
9.4 |
| Starting enrichment: |
Prime start |
| Fuel induction system: |
1 carburetor |
| Lubrication system: |
Wet sump |
| Engine oil capacity: |
1.6 l/ 1.4 l (with/ without oil filter replacement) |
| Ignition system: |
CDI Micro-computer |
| Ignition timing: |
ATDC 8.0 – BTDC 20.0 deg. |
| Spark plug: |
DPR6EB-9 |
| Alternator: |
14 Amp with Rectifier regulator ( battery charging: 13Amp) |
| Cooling system: |
Raw-water, thermostatically controlled |
| Exhaust system: |
Through propeller hub |
| Bracket / Drive |
| Trim: |
Manual : 5 position, PTT: -(continuously variable) |
| Shallow water drive: |
Manual : 2 position, PTT: -(continuously variable) |
| Steering angle: |
42 deg. each direction |
| Gear shift: |
F-N-R |
| Gear ratio: |
2.08 (27/13) |
| Properller fitting: |
Spline |
| Propeller rotation: |
Clockwise |
| Shaft length: |
S, L |
| Engine transom height: |
S: 423 mm (16.7 inch) , L: 550 mm ( 21.7 inch) |
