Product Description

F25DMH
Tiller Handle
Dry weight: 77-86 kg
Performance
Max. prod shaft output: 18.4 kW (25 ps) @5500 r/min
Full throttle operating range: 5000-6000 r/min
Idling speed: 975 ± 50 r/min
Fuel consumption: (9.2.0 l/h @ 5500 r/min *reference data)
Engine
Engine type: SOHC, In-line 2
Displacement: 498 cm3
Bore x stroke: 65.0 mm x 75.0 mm
Compression ratio: 9.4
Starting enrichment: Prime start
Fuel induction system: 1 carburetor
Lubrication system: Wet sump
Engine oil capacity: 1.6 l/ 1.4 l (with/ without oil filter replacement)
Ignition system: CDI Micro-computer
Ignition timing: ATDC 8.0 – BTDC 20.0 deg.
Spark plug: DPR6EB-9
Alternator: 14 Amp with Rectifier regulator ( battery charging: 13Amp)
Cooling system: Raw-water, thermostatically controlled
Exhaust system: Through propeller hub
Bracket / Drive
Trim: Manual : 5 position, PTT: -(continuously variable)
Shallow water drive: Manual : 2 position, PTT: -(continuously variable)
Steering angle: 42 deg. each direction
Gear shift: F-N-R
Gear ratio: 2.08 (27/13)
Properller fitting: Spline
Propeller rotation: Clockwise
Shaft length: S, L
Engine transom height: S: 423 mm (16.7 inch) , L: 550 mm ( 21.7 inch)