| Yamaha Outboard E40JMH |
| Tiller Handle |
| Dry weight: |
65 – 71 kg |
| Performance |
| Max. prod shaft output: |
29.4 kW (40 ps) |
| Full throttle operating range: |
4500 – 5500 r/min |
| Idling speed: |
1100 – 1200 r/min |
| Fuel consumption: |
(20.0 L/h @ 5500 r/min) |
| Engine |
| Engine type: |
In-line 2 |
|
669 cm3 |
| Bore x stroke: |
78.0 mm x 70.0 mm |
| Compression ratio: |
6.3:1 |
| Starting enrichment: |
Manual choke |
| Scavenging: |
Loop charge |
| Fuel induction system: |
1 dual throat carburetor |
| Lubrication system: |
Pre-mixed fuel and oil |
| Oil-fuel mixing ratio: 50: |
50;1 |
| Engine oil capacity |
– |
| Ignition system: |
CDI |
| Ignition timing: |
BTDC 4.0 – BTDC 23.0 deg. |
| Spark plug: |
B7HS |
| Alternator: |
80 W (W,WH : 6 A) |
| Cooling system: |
Raw-water, thermostatically controlled |
| Exhaust system: |
Through propeller boss |
| Bracket / Drive |
| Trim: |
5 positions |
| Shallow water drive: |
– |
| Steering angle: |
45 deg. each direction |
| Gear shift: |
F-N-R |
| Gear ratio: |
2.00 (26/13) |
| Properller fitting: |
Spline |
| Propeller rotation: |
Clockwise |
| Shaft length: |
MH: S,L,Y |
|
W,WH:L |
| Engine transom height: |
S: 421 mm (16.6 inch) |
|
L: 548 mm (21.6 inch) |
|
Y: 598 mm (23.5 inch) |
